Scrap Nonferrous Metals

Scrap Nonferrous Metals

Scrap metal is known as either ferrous or nonferrous scrap. Both metal types have been used by mankind since early times. In fact, nonferrous metals were the first metals used by humans for metallurgy.

While ferrous metals contain some iron, nonferrous metal does not contain iron as a component. When recycled, scrap nonferrous metals and other material can be repurposed in many new uses.

Aluminum, copper, lead, nickel, tin, and zinc are among the various base metals that are referred in the industry as nonferrous scrap. Scrap nonferrous metals are infinitely recyclable and important to maintain sustainability in resource conservation.

What is a Nonferrous Metal?

Scrap nonferrous metals make up a small percentage of the total quantity of material recycled in the United States, but by value, it accounts for more than half of the total U.S. scrap recycling industry performance, about $32 billion in 2015.

Scrap metal recycling involves the recovery and processing of scrap nonferrous metals from end-of-life products or structures. It can then be introduced as a raw material in the creation of new products. The recycling process also reduces the need for mining which has detrimental affects on the environment.

These scrap nonferrous metals have a range of uses and retain their chemical properties through recurring recycling and reprocessing. In fact, once scrap metals are collected, they can produce new metal.

Scrap nonferrous metals are known for their strength and characteristics that are malleability, lighter weight, and corrosion resistivity.

Nonferrous Metals

Copper
Copper

Copper is one of the most precious scrap metals that you can recycle. It has a reddish hue when in good condition, but it can earn a dark brown appearance when worn.

Copper is a raw element found in the earth’s surface. This industrial metal resists corrosion and demonstrates highly malleable characteristics. These characteristics include being durable and having high thermal and electrical properties. These properties make their scraps valuable.

Bronze is an alloy of copper and other metallic materials. It possesses similar properties with copper. Its scraps refined and used to make medals, musical instruments and other hardware materials.

Lead is praised for its industrial properties including corrosion resistance and malleability. While pliable and soft, lead is heavy, making it a good fit for wheel weights and pipes.

Aluminum
Aluminum

Aluminum has a like look to steel, but magnets won’t stick the same. Aluminum can be found in window frames, soda cans, bicycles, and motorbikes.

Niсkеl is соmmоnlу uѕеd in gadgets, coins, compound rеасtiоnѕ аnd in thе рrоduсtiоn of ѕtаinlеѕѕ ѕtееl. it iѕ regularly uѕеd in аn combination fоrm with irоn аnd сhrоmium.

Nickel iѕ аlѕо a key соmроnеnt in niсkеl-mеtаl hуdridе battery-powered bаttеrу frameworks. Thеѕе frameworks are regulars in еmеrgеnсу роwеr ѕuррliеѕ, роrtаblе devices аnd еlесtrоniсѕ and primary nonferrous metals.

Zinс itѕеlf iѕ vеrу solid and has properties that won’t оxidizе whеn еxроѕеd tо еlеmеntѕ like wаtеr аnd аir. In this way, by соаting steel, whiсh соrrоdеѕ еаѕilу in аlmоѕt any еnvirоnmеntаl ѕituаtiоn, thе Zinc рrоtесtѕ thе ѕtееl with a соntinuоuѕlу ѕtrоng metallic bаrriеr that shields dampness from connecting with the steel.

Brass
Brass

Brass is a combination of zinc and copper. This heavy scrap metal has a yellowish color, but often takes a greenish appearance when left outside for a long period of time. The amount of zinc present depends on the value of its scrap because more zinc content means less ductility which decreases its value to the electronic industries despite its elevated intrinsic value.

Titanium it is typically used in jewelry, prosthetics, bicycle frames, surgical tools, and other high-performance products. Strength wise, titanium is equal to that of common, low-grade steel alloys, but are less dense.

Metal Categories

The team at Interco operates with dealers and industrial partners throughout North America as well as Central and South America. Interco accepts, processes, trades, and recycles a broad range of nonferrous metals. As a result, the team processes minerals and industrial byproducts including:

Interco Recycles Nonferrous Metals

Since 1996, Interco has been a leader in the scrap nonferrous metals recycling industry located just across the river from St. Louis in Madison, Illinois. Interco recycles mixed scrap loads. In addition, our suppliers can ship a truckload of material (usually 40,000+ pounds) – with any combination of the above items. There is no minimum quantity per item, they just need to be separated either by bale or by gaylord box.

To learn more about Interco’s mixed scrap recycling services, click here.

3 Environmental Advantages to Scrap Metal Recycling

3 Environmental Advantages to Scrap Metal Recycling

Recycling scrap metal is an important part of preserving our planet. On the other hand, mining is the process of obtaining minerals from a mine which contributes to erosion, deforestation and contamination of soil, ground, and surface water. The negative effects of mining can lead to health issues in local populations. Still, recycling metal is extremely important, especially today when the planet is on an irreversible decline.

Metal products are used daily in the average household. In fact, the apparent consumption of aluminum in the United States totaled 3.4 million metric tons in 2019.

Why Should You Recycle Scrap Metal?
Why Should You Recycle Scrap Metal?

Why Should You Recycle Scrap Metal?

Metal is obtained through mining of metal ores and most metal ores are found in untouched, uninhabited landscapes. Recycling metal can benefit the environment by avoiding mining and therefore the destruction of landscapes as recycling metal does not involve the extraction of non-renewable metal ore.

Saving Natural Resources

Recycling conserves our resources as with the practice of mining, we reduce our resources. The act of recycling uses a lot less energy than needed to mine and to process the new materials. Natural resources such as wood, water, minerals, and fossil fuels can be conserved when recycling. In fact, with every ton of steel recycled, 2500 pounds of iron ore, 1400 pounds of coal and 120 pounds of limestone are therefore conserved.

Reduces Environmental Pollution

Electronic waste can negatively impact the environment if not properly disposed of. For example, if your laptop ends up in a landfill, substances such as lead from the battery can leak into the soil leading into our water systems. Additionally, mining, processing, and transporting requires a lot of energy which then results in large amounts of CO2 being released into the atmosphere. Recycling uses only a small portion of the resources required for mining, so it is a much more sustainable option.

Saving Natural Habitats

Mining is impossible without disturbing the surrounding habitats. Beyond the risk of soil and water contamination, previously undisturbed landscape and homes of wildlife are destroyed.

Most recyclable metals can be processed indefinitely without any loss in their quality. These metals include aluminum, nickel, lead, tin, brass, silver and zinc. In fact, metals such as aluminum and copper can save you more than 75% in energy bills when using recycled metal instead of natural resources too.

Recycling with Interco Helps the Environment
Recycling with Interco Helps the Environment

Recycling with Interco Helps the Environment

Founded in 1996, Interco has grown from an electronic scrap recycling company to a comprehensive processor and recycler handling nonferrous, industrially generated metal-bearing complex residues, most battery chemistries, and catalysts.

Interco is centrally located on the Illinois-side of St. Louis on a 40-acre industrial complex comprised of 7 buildings with 400,000 square feet of warehouse space. As a result, Interco specializes in straight or mixed scrap loads. With a staff of 100 full time employees, Interco receives, processes, upgrades, repackages and ships approximately 15,000 tons of material monthly.

For more information, click here.

Myths About Recycling Scrap Metal

Myths About Recycling Scrap Metal

Metals are valuable materials that can be recycled numerous times without degrading their properties. From appliances to batteries to cans to clothes hangers, metal is everywhere in our homes.

Metal is in limited supply, and while more glass and plastic are manufactured from natural resources, we can’t make more aluminum, copper, and steel. Metals are not a renewable resource. They are found in rock, called ore, which is a part of the earth’s crust.

Recycling metal is a process which uses waste materials or products that have already served their initial purpose. These materials are then used in various ways to develop new products.

Interco specializes in non-ferrous metals recycling. In fact, the company buys, processes, trades, and recycles a broad range of non-ferrous metals. The firm processes minerals and industrial byproducts for non-ferrous metals recycling.

What Are Myths to Recycling Scrap Metal?

Myth: Scrap metal recycling is not important
Myth: Scrap metal recycling is not important

Scrap metal recycling is not important

A common myth concerning scrap metal recycling is that it is not important due to the use of landfills. Although, landfills contaminate water supply, release methane gas, and more which is detrimental to the environment.

Therefore, when consumers choose to recycle over landfill, it preserves natural resources, energy
consumption, and reduces the negative impact on the environment. Additionally, you can reduce the amount of greenhouse gases being released into the atmosphere.

Recycling metal is not economically viable

One may consider the cost to metal recycling, but it is nothing in comparison to the money spent in mining and processing virgin metal. Recycled metal is significantly more cost effective due to that fact that it is used material. Rather than virgin material, recycling metal uses a considerably lower energy consumption. Unless it is recycled, metal products become lost products and lost profits. Additionally, it also generates big business. Not only do the companies benefit from selling and purchasing the scraps, but it also creates an entire industry around recycling the metal.

Myth: There is no demand for scrap metal
Myth: There is no demand for scrap metal

There is no demand for scrap metal

As many industries choose to focus on reducing the environmental impact of their activities, the demand for scrap metal has increased. Metals like steel which can be melted down without losing any of its strength is one of the most in demand types of scrap. In 1996 Interco was founded as a computer, electronics, and precious metals recycler. In 2005, as a response to many suppliers’ requests and as an answer to the growing market need, Interco entered non-ferrous metals recycling after nearly ten years as a major international recycler.
Interco processes minerals and industrial byproducts including:

  • Copper/Iron Materials
  • Red Metals & Residues
  • White Metals & Residues
  • Computers & Electronics
  • Precious Metal Recycling

Items Made of Different Materials Must Be Sorted

Interco buys mixed or straight loads of nonferrous metals, eScrap, and other materials. There is no need to remove batteries from electronics. There is also no need to pull any eScrap apart. Interco does that on the facility so you don’t have to.

   Myth:  Only Machines Sort Materials in Recycling Facilities
Myth: Only Machines Sort Materials in Recycling Facilities

Only Machines Sort Materials in Recycling Facilities

There are over 100 expert Interco staff dedicated to the processing, sorting, and packing of materials. Interco uses both hand sorting techniques and mechanical separators to ensure all contaminants have been removed. Workers sort and separate 800-1,000 parts and deal with more than 400 different alloys at any given time.

Don’t Fall For the Myths! Recycle With Interco

Scrap metal has significant value, which causes people to collect it for sale to recycling operations. Due to metal recycling, industries today do not have to face the problem of precious metal shortages. It is important to note that Interco is a leading North American non-ferrous metals recycling company located just across the river from St. Louis in Madison, Illinois.

For more information on Interco’s services, click here.

Mixed Load Services

Mixed Load Services

Many recycling companies will refuse mixed loads of scrap. However, the Interco trading department works with industrial consumers and suppliers of nonferrous scrap materials – including mixed loads – throughout North, Central, and South America. The trading department has contracts with smelters and refineries worldwide to hedge against a quickly changing marketplace.

Nonferrous Metals
Nonferrous Metals

Nonferrous Metals

Interco specializes in nonferrous metals recycling. The company entered nonferrous metals recycling after nearly ten years as a major international recycler. Interco processes more than 12 million pounds of nonferrous materials every month.

The nonferrous metal recycling process begins by gathering bulky nonferrous metals. Interco buys, processes, trades, and recycles a broad range on nonferrous metals.

Interco processes minerals and industrial by-products including copper/iron materials, red metals & residues, white metals & residues, computers and electronics, and precious metal recycling.

Interco believes there is a safer and more environmentally beneficial way to dispose of scrap metal rather than landfilling. Interco operates with the goal of ease and efficiency.

Automotive Parts
Automotive Parts

Automotive Parts

Professional recyclers like Interco will buy scrap automotive parts and perform a recycling process which avoids landfilling. Interco does not recycle whole cars or trucks but accepts scrap automotive parts that are nonferrous. Interco works to recycle automotive parts to reintroduce them into the industrial cycle. Recycling automotive parts reduces the need for extracting, refining, and processing raw materials all of which create significant air and water pollution. That is why Interco is dedicated to the reuse and recycling of expired automotive parts.

The most common automotive parts that go through the recycling process include auto radiators, transmissions, and aluminum auto wheels. In fact, Interco handles on average 22,000,000 pounds of material each month which equals approximately 10,000 metric tons of material in one facility. Interco creates and executes efficient solutions for both suppliers and customers across all industries.

eScrap
eScrap

eScrap

eScrap describes end-of-life business and consumer electronic products. The computers and electronics around us fit into the category of eScrap. More and more technology is disposed of each day, so as a result, Interco performs eScrap recycling. nterco recycles computers and electronic devices including adapters, CD drives, docking stations, fans, hard drives, keyboards, networking equipment, phones, power supplies, printers, copiers, fax machines, computer wire, and much more.

Interco provides metal, computer, and electronic recycling services to a large variety of industrial, dealer, and government organizations. Recycling electronics with Interco assures destruction of the printer parts and includes asset tagging and serialized inventory reporting. Interco recycles approximately 10,000 tons metric tons of materials every year – e-scrap making up 4 million pounds per month

Interco Recycles Mixed Loads

Interco offers recycling services that not only benefit the consumer but works in helping the environment by reusing valuable materials and keeping waste out of landfills. eScrap recycling reduces environmental pollution, provides raw materials for industries and acts as a source of funds. Companies like Interco recycle eScrap and take it through a simple and efficient procedure for recycling. In fact, Interco purchases eScrap across the United States and North America.

Waste is a global problem and governments around the world are in search of ways that will reduce the space needed for landfills. The eScrap recycling services offered by Interco reduce environmental pollution and extract reusable materials. Additionally, Interco offers delivery, pickup, full truckload, and LTL services.
To learn more about the recycling services Interco offers, please click here.

Interco Specializes in Mixed Scrap Loads

Interco is an expert in recycling loads of mixed scrap material. In addition to all things eScrap, computers, servers and electronics, Interco buys the following:

Interco Specializes in Mixed Scrap Loads
Interco Specializes in Mixed Scrap Loads

Red Metals

  • Bare Bright
  • #1 Copper
  • #2 Copper
  • Copper Chops
  • Red Brass (Red/Semi-Red)
  • Yellow Brass – Clean (Solids/Turnings)
  • Brass Shells – Clean (No Live Rounds)
  • Brass Breakage (50%/75%)
  • Auto Radiators (Clean/Dirty)
  • Al/Cu Radiators (Clean/Dirty)
  • Al/Cu Radiator Ends
  • Water Meters (Clean/Plastic/Steel)
  • #1 Insulated Wire (60-65% Cu)
  • #2 Insulated Wire (40-45% Cu)
  • Heliax – Open-Eye Copper/Copper
  • Harness Wire
  • Jelly Wire
  • Computer Wire (30-35% Cu)
  • Christmas Lights
  • 2-in-1 Wire (8A/6A)
  • Copper-Clad Wire (30%)
  • BX Cable (Al/Fe)
  • URD Wire
  • Copper Yokes
Interco Specializes in Mixed Scrap Loads
Interco Specializes in Mixed Scrap Loads

White Metals

  • Old sheet (<5% allowance)
  • Cast Aluminum (<5% Allowance)
  • Painted Siding
  • Road Signs
  • MLC (Bare/Paint+Poly)
  • UBC’s (Mill-Grade/Secondary)
  • 10/10 Extrusions – Clean (<2% allowance)
  • Litho
  • EC Wire
  • Aluminum Radiators (Clean or Dirty)
  • Alum Turnings – Clean (High-Grade/Mixed)
  • Al Foil and Screens
  • Aluminum Breakage
  • Transmissions (no torque converters)
  • Auto AC compressors
  • 356 Wheels (Clean or Dirty)
  • Chrome Wheels (Clean or Dirty)
  • Truck Wheels (Clean or Dirty)
  • ACSR/Insulated Alum Wire – 65% Alum
  • Gas Meters (Whole)
  • Oxygen Tanks (Halved or Open-Ended)
  • CATV Wire (Bare/Black/Irony)
  • Old Zinc Die Cast (Clean/Irony)
  • 304 Stainless (Solids/Turnings)
  • 316 Stainless (Solids/Turnings)
Interco Specializes in Mixed Scrap Loads
Interco Specializes in Mixed Scrap Loads

Lead

  • Clean Soft Lead
  • Hard or Mixed Lead
  • Lead Shot
  • Range Lead – Indoor
  • Wheel Weights
  • Auto Batteries (Wrapped/Banded)
  • Steel-Cased Batteries (Wrapped/Banded)
  • Lead-Copper Cable

Copper-Iron/Other

  • Clean Electric Motors (Mixed/Large)
  • Sealed Units
  • Cast Iron Compressors
  • Ballasts (Non-PCB and Electronic)
  • HID ballasts (Al/Fe)
  • Cu Transformers (Small/Large)
  • Al/Cu Transformers (Small)
  • Aluminum Transformers (Large)
  • Welders and Battery Chargers
  • Copper-Bearing Material (CBM)
  • Alternators
  • Starters (Alum/Steel-Nosed)
  • Electric Meters (Digital/Analog/Glass)

Conclusion

Interco recycles mixed scrap loads. In addition, our suppliers can ship a truckload of material (usually 40,000+ pounds) – with any combination of the above items. Additionally, there is no minimum quantity per item. In fact, they just need to be separated either by bale or by gaylord box.

To learn more about Interco’s mixed scrap recycling services, click here.

Recycling Aluminum Cans

We Must Recycle Aluminum Cans

Recycling Aluminum Cans

Regardless of how abundant aluminum is, recyclers still engage in the practice of recycling aluminum cans. Aluminum is the 13th element on the periodic table and it is a metallic element. It is a soft metal that is also ductile, malleable and lightweight. Aluminum constitutes approximately 8% of the earth’s crust. Bauxite is the ore that they produce aluminum from. The bottom-line: recycle aluminum cans.

This metal is a non-ferrous metal; it does not exhibit metallic properties. Also, it does not easily ignite. It is also corrosive resistant and can be easily cast, both of which are major reasons why we recycle aluminum cans. Due to the versatility of aluminum, manufacturers mostly use it after steel. Aluminum is used to make cans, while they usually mix it with magnesium to increase the can’s strength. However, the cans constitute a large percentage of aluminum.

How Important is Recycling Aluminum Cans?

Because of the high percentage of aluminum present in these cans, recycling aluminum cans serves as a source of aluminum. Today, one cannot overemphasize the widespread use of aluminum in the packaging of products in the manufacturing industry. Aluminum is used to package:

Recycling Aluminum Cans
  • Chemicals
  • Oils (brake oils, cooking oils, etc.)
  • Milk
  • Beverages (soda, etc.)
  • Vegetables (Tomatoes, sweet corn, etc.)

Manufacturers use aluminum cans to package virtually all kinds of perishables. Because of its wide use, recyclers have come to see reasons why we must recycle aluminum cans. The main reasons include:

  1. Saves Energy
  2. Source of Aluminum
  3. More Cost-effective
  4. Reduces Pollution

The process of recycling aluminum cans saves energy and resources. Recycling aluminum cans make use of only 5% of the energy and emissions required to mine aluminum from bauxite. This alone helps reduce the greenhouse effect and protect the ozone layer from emissions. Recycling aluminum cans can serve as a source of aluminum regardless of the presence of magnesium. This is because recyclers recycle aluminum cans repeatedly with little or no significant loss of its intrinsic properties. Also, when recycling aluminum cans, they retain their quality.

Recycle Aluminum Cans to Protect Natural Resources

Recycling Aluminum Cans

Recycling aluminum cans help protect natural resources like bauxite and provides an alternative aluminum source. About 75% of the first aluminum made is still in circulation. Recycling aluminum cans are very economic because of the huge amount of energy saved in recycling it. Approximately 95% of energy is saved from recycling aluminum cans. More so, recyclers melt the scraps from the production of aluminum and repeatedly use them. Recycling aluminum cans help save bauxite, chemical products, and electricity.

Recycling Aluminum Cans

As recyclers recycle aluminum cans, they reduce the rate of both air and soil pollution. Many recyclers focus their efforts recycling aluminum cans by recycling used beverage cans. Aluminum cans are non-biodegradable and if could cause problems if not properly managed. In addition, recycling aluminum cans reduce or prevent the release of carbon dioxide which occurs when mining for bauxite. This gas is toxic and if saturated in the air could cause acid rain. Acid rain could cause damage to both plants, life and properties.

Conclusion

In conclusion, by recycling aluminum cans, we can save energy as well as non-renewable fossil fuels. Furthermore, we can reduce landfill and air pollution by limiting the release of carbon dioxide into the atmosphere. We must recycle aluminum cans to save our environment. Contact Interco to recycle your aluminum cans.

Recycling Used Beverage Cans (UBC)

Most people do not consider recycling used beverage cans. They toss used beverage cans into the trash rather than in to recycle bins as soon as they consume its contents. But is this right?

Recycling Used Beverage Cans (UBC)

Recyclers refer to used beverage cans as UBC when they are recycling used beverage cans. These UBC are very much recyclable because of their metallic properties and composition.

In addition, aluminum is the main material in producing UBC which has many purposes i.e.

  • Reproduction of cans
  • Foils
  • Kitchen utensils
  • Window frames
  • Vehicle parts (engine compartments)
  • Airplane parts, etc.

Why Recycle Used Beverage Cans?

Recycling Used Beverage Cans (UBC)

Recycling used beverage cans is very important. Recycling aluminum make use of approximately 5% of the total energy and emission required to produce aluminum from its ore (bauxite).

This means it is significantly cheaper, economic and greener (in term of reduced emission) to recycle used beverage cans than to mine bauxite and refine it for aluminum. At Interco recycling used beverage cans is so important.

Furthermore, recycling used beverage cans over and over again is possible without significant loss of its aluminum (metallic) properties. By recycling these cans, it helps conserve non-renewable fossils needed to make new aluminum from bauxite which in turn reduces:

  1. Energy consumption (approximately 95% energy)
  2. Emission of gases i.e. carbon dioxide
  3. Global warming (greenhouse effect)

How to Recycle UBC?

Recycling Used Beverage Cans (UBC)

How then do they get recycled? For the steps involved in recycling used beverage cans, read on:

Recycling Used Beverage Cans (UBC)
  1. The aluminum cans are first collected from can recycle bins or UBC depositories.
  2. Then the recycling company or manufacturing industry uses a shredder to shred the aluminum cans. This helps removes any colored coating.
  3. They subject the aluminum shreds to intense heat temperature in a furnace to melt.
  4. Finally, the molten aluminum is then poured into casts (ingot) to set. Over a million cans get produced from each of these ingots.

Conclusion

Like earlier stated, it is possible to recycle aluminum many times without degrading its intrinsic properties. Thus, if you desire to recycle or selling your UBC, Interco is the top company for recycling used beverage cans in the Midwest. They offer quality metal recycling services. Contact them here.

Recycling White Metals: The Process

Recycling White Metals

Recycling White Metals: The Process

Recycling white metals is one of the most practiced types of recycling. White metals are white or silvery alloys, especially tin-based alloys usually used for the surfaces of bearings. These alloys may contain tin, cadmium, zinc, lead, and bismuth. They are Babbitt metals with low melting points.

Manufacturers use white metals for producing:

White metals are common choices for the production of modern jewelry i.e. rings. They have high market value over gold or rosy metals. This is because silvery-white metals compliment skin tone and are timeless, unlike the gold alloys. Examples of white metals are: tin, silver, white, gold, nickel, lead, and iron.

Recycling White Metals: The Process

White metals are powerful conductors of heat and electricity and they are also known to be powerful amplifiers. This now explains why silver is the best conductor. White metals are also non-ferrous metals—They don’t have magnetic features. Their alloys are soft, ductile but tough. They also have a high coefficient of friction.

Recycling of White Metals

Recycling White Metals: The Process

Recycling white metals is usually performed by professional recyclers. These recyclers buy white metal scraps from scrap yards, processes and recycle them. Recyclers recycle white metals in a similar way that metals are generally recycled. They subject the metals to immense heat temperature that is above their melting point and they are cast into molds. Recycling white metals is essential so that they process the scraps into new metals of better quality. The most common use of white metals is in the manufacture of bearings.

Examples of the items that use bearings are: gearboxes, air planes, turbines, pumps, compressors, fans, etc.

Recycling White Metals: The Process

Prior to this list, the need for recycling white metals is essential so that manufacturers can manufacture these devices. Also, recycling these worn out or outdated devices help protect the natural source of white metals from being total depletion.

How to Recycle White Metals

Recycling White Metals: The Process

Recycling white metals is straightforward without much complexity. Recyclers like Interco specialize in recycling white metals and its scraps for further use and processing.

The following steps involved in recycling white metals are:

  1. The recyclers collect or buy the scraps of white metals from scrap yards or deposits.
  2. A metal shredder shreds the white metals into smaller pieces.
  3. Then, they transport these shreds into a furnace. However, white metal alloys don’t have high melting points. The temperature should be set a little above their melting points i.e. 350◦C. This is to ensure uniformity in the molten state.
  4. They mix a few additives i.e. chemicals to improve its quality.
  5. Next, recyclers cast the molten white metal into mold or ingots and leave to cool.
  6. They will transport these casts to manufacturing or industrial companies for further processing.

 

Conclusion

The application of white metals today may not be outspoken, but it is indeed important for the possibility of many inventions. Furthermore, recycling white metals properly helps reduce pollution by preventing it from ending up in a landfill. Also, recycling white metals helps provide job opportunities for prospective recyclers.

Recycling Scrap Red Metals, Metallics, Residues, and Drosses

Recycling Scrap Red Metals, Metallics, Residues, and Drosses

Recycling Scrap Red Metals, Metallics, Residues, and Drosses

Recycling Scrap Red Metals makes for a great conversation. Scrap metals are very much recyclable. Because of how recyclable they are, it makes them valuable when Recycling Red Metals, Metallics, Residues, and Drosses.

Recycling scrap copper or brass is basically the systematic collection of red metals, residues and drosses that exist at the end of their useful life. When Recycling these industrial Red Metals, recyclers sort the nonferrous scrap by quality and copper content. In addition, they are alloys and are termed red metals because of their similar reddish color characteristic and copper content.

Why are They Valuable?

Recycling this sort of metal can be done repeatedly without any alteration of their intrinsic properties. Especially relevant examples of these scrap red metal, metallics, residues and drosses and why they are valuable:

  • Copper: This industrial metal resists corrosion and demonstrates highly malleable characteristics such as being durable and having high thermal and electrical properties. Cable and electronic equipment manufacturers use computer materials. These properties make their scraps valuable.
  • Bronze: This red metal is an alloy of copper and other metallic materials. aluminum. It possesses similar properties with copper. Its scraps refined and used to make medals, musical instruments and other hardware materials.
  • Brass: The combination of copper and zinc make up this red metal alloy. The amount of zinc present depends on the value of its scrap because more zinc content means less ductility which decreases its value to the electronic industries despite its elevated intrinsic value.

The Process of Recycling Scrap Red Metals

Recycling Scrap Red Metals, Metallics, Residues, and Drosses

Four main steps comprise the process of recycling scrap red metals. Recycling scrap red metals involve four main steps:

  1. Collection: First of all, collectors gather the various red metal scraps. Certain manufacturing companies buy these scraps. They buy it from people who sell their worn out equipment, parts, or instruments. These items often contain red metal. This process of buying is the collection process. Accordingly, one of the largest source of red metals represent materials made of copper i.e. connecting wires.
  2. Sorting: The process of recycling scraps red metals takes off after collection. Consequently, the recycling facilities sort the collected scraps. They sort primarily according to their quality (intrinsic values). Recyclers separate the pure copper from its alloys (i.e. brass, bronze etc.). Processors then use magnets and optical color differentiation sensors and discern the red metal type. After this, they often deliver the material to a metal shredder to prepare it for the next step.
  3. Melting and Purification: Furthermore, another step is deployed after this material has been successfully collected and sorted. They then subject it to to high temperatures so they can melt and purify the metal and extract the copper. The purification ensures the metal is free of contaminants. This process ensures the metal becomes high-quality.
  4. Solidifying: Finally, after the scraps have been melted and purified, factories cast them into shapes in its molten state depending on their purpose and leave them to dry.

Conclusion

In conclusion, the need for recycling scrap red metal is imperative as it is more economical for the manufacturing industries than buying raw materials as well as helping the environment. Interco has been Recycling Scrap Red Metal, Metallics, Residues, and Drosses since 1996.

Processing and Repackaging

Processing and Repackaging

Interco offers more than Industrial Recycling services. We offer various professional services including Processing and Repackaging, Recycling, Processing, Repackaging, Aggregating, Trading and Consulting. What we do: we cater to industrial and dealer clients. Consequently, we are not open to the public.

Recycling

Interco provides recycling processing and repackaging services to industrial accounts and government organizations throughout the continental United States. We also cater to companies throughout North, Central and South America. Interco specializes in the packaging and placement of refinery- and smelter-ready materials throughout the world. Interco leverages decades-long partnerships with end-consumers in the United States, Europe, South America, and Asia. As a result, Interco adds value and creates benefits while helping to minimize the world’s carbon footprint.

Processing

First of all, the Interco facility is located just outside of St. Louis in Madison, Illinois. As a result, Interco provides the processing and repackaging of a wide-range of metals and consumer electronics. This material is segregated, graded, and repackaged to best suit the needs of end-consumers – smelters, refineries, and ingot makers – worldwide. Interco specializes in processing and repackaging complex raw materials, slags, skimmings, dross, powders, dusts and other industrial residues.

Processing and Repackaging

Interco repackages traditional grades of non-ferrous metals:

  • copper
  • brass and bronze
  • aluminum
  • lead
  • zinc
  • nickel
  • tin

Balers compress this material in to bales. In addition, Interco packs material in large corrugated pallet boxes often referred to as gaylords. Furthermore, the team utilizes the likes of bulk bins, flexible intermediate bulk containers (FIBC), and bulk bags for transport to end-consumers worldwide. Similarly, Interco bulk loads ocean freight containers with items such as:

  1. Electric Motors
  2. Sealed Units & Compressors
  3. Automotive Parts
  4. Copper
  5. Electronics

Aggregating

Interco aggregates various forms of metals, consumer products and electronics from dealer suppliers in to like kind and commodities. Likewise, Interco processes the materials in the 150,000+ square foot recycling facility. We sort some material indoors and separate the rest in the remaining 20-acre campus. Every item must be received, separated, sorted, graded, cleaned (if need be), processed, and repackaged as specified by the Interco partner end-consumers. The importance of detail in aggregating cannot be overstated. That is what we do.

Trading

In addition, Interco takes physical delivery of materials for processing and repackaging at the Interco Midwest recycling and distribution facility. Interco operates a commodity trading division on site as well. First of all, the experienced Interco traders facilitate the export or delivery of materials directly to end-consumers around the globe. Although the trading of nonferrous metals represents just under ten percent of the operations at Interco, Interco maintains an international presence. Customers, traders and suppliers alike benefit from strong national and international relationships cultivated since the company’s inception in 1996.

Consulting

In addition, the Interco team also offers industrial recycling consulting and supply chain services. Most noteworthy, professionals from Interco visit distributors and industrial manufacturers to coordinate recycling efforts. Consequently, the goal is to streamline the process to maximize efficiency and provide a turnkey solution. Interco coordinates the movement, processing and repackaging of recyclable material throughout the supply chain.

Nonferrous Metal Scrap

Recycling Nonferrous Scrap Metal

Nonferrous Metal Recycling

Interco specializes in Nonferrous Metal Recycling. As a result, the company buys, processes, trades and recycles a broad range of non-ferrous metals. In addition, the firm processes minerals and industrial byproducts for non-ferrous metals recycling.

It is important to note that Interco is a leading North American nonferrous metal recycling company located just across the River from St. Louis in Madison, Illinois.

Nonferrous Metal Recycling Since 1996

Most noteworthy, since 1996 Interco has been a stalwart in nonferrous metal recycling. Consequently, the team works with dealers and industrial partners throughout North America as well as Central and South America. Interco buys, processes, trades and recycles a broad range of non-ferrous metals. As a result, the team processes minerals and industrial byproducts including:

Nonferrous Metal Recycling

Interco remains a large volume buyer of all grades of Copper/Iron scrap. Especially relevant, they always buy:

  1. Electric Motors
  2. Shredded Electric Motors
  3. Sealed Units
  4. Transformers
  5. Automotive Parts (Alternators, Starters, Radiators, Compressors, Solenoids, Armatures, Rotors, Stators, Wheels, Lead Wheel Weights, Transmissions, etc.)
  6. Copper & Brass Bimetals

In 1996 Interco was founded as a computer, electronics and precious metals recycler. In 2005 in response to many suppliers’ requests and as an answer to the growing market need, Interco entered nonferrous metal recycling after nearly ten years as a major international recycler.

INTERCO BUYS NON-FERROUS METALS

Red Metals such as:

Nonferrous Metal Recycling

Interco recycles Bare Bright, #1 Copper, #2 Copper, Red Brass, Semi-Red Brass, Yellow Brass Solids and Turnings, Brass Shells, and Auto Radiators can be recycled. Interco also processes Air Conditioners, #1 Insulated Wire, #2 Insulated Wire, 2-In-1 Wire, BX Cable, URD Wire, Copper-Clad Wire, Harness Wire, Christmas Lights, Computer Wire, Copper Yokes.

Copper/Iron Metals such as:

Many types of Electric Motors, Large Electric Motors, Sealed Units, Ballasts, HID Ballasts process very smoothly. Interco also handles Cast Iron Compressors, Transformers, Welder- and Battery-Chargers, Copper-Bearing Material (CBM), Alternators, Starters, AC Compressors.

White Metals such as:

Nonferrous Metal Recycling

Old Sheet, Cast Aluminum, Painted Siding, MLC, UBC’s, 10/10 Extrusions, Litho, EC Wire, Aluminum Turnings, C&D, Aluminum Breakage, as well as Aluminum Foil can be recycled. The company also recycles Aluminum Screens, Transmissions, 356 Aluminum Wheels, Truck Wheels, and Chrome Wheels. Interco is a proud member of  ISRI the Institute of Scrap Recycling Industries.

The firm processes thousands of pounds of ACSR Wire, Electric Meters, Gas Meters, Water Meters, Oxygen Tanks, Cable TV boxes, Bare ATV, Insulated CATV wire and cable, Old Zinc Die Cast, Stainless Steel Solids and Turnings.

Leads such as:

The main leads Interco recycles include Clean Soft Lead, soft- and hard- Mixed Leads, Indoor and Outdoor Range Lead, Wheel Weights, Lead Shot, Lead-Acid Batteries, Steel-Cased Batteries all all recycled.

INTERCO RECYCLES COMPUTERS & ELECTRONICS

Components such as:

Aluminum cans being recycled

Adapters with and without cords, CD-ROM and Floppy Drives, Consumer Electronics, Docking Stations, and PC Fans can be recycled. Interco also recycles Hard Drives (with and without boards) that can be whole, bent, punched, or shredded. Other items including Keyboards, Networking Items such as Modems, Routers, and Switches. Interco also recycles Phones, Power Supplies (with and without cords), Printers, Copiers, and Fax Machines. Although Interco does not shred in house, Interco buys Shredded Hard Drives (with and without boards) and UPS (with or without batteries) as well.

Ballasts (non-PCB, electronic, and HID), Capacitors, Heat sinks, Wire such as CAT5, Computer, Ribbon/Flatwire, Copper or Aluminum Degaussing Wire.

Printed circuit boards to be recycled

Consumer Electronics Batteries such as:

Absolyte cells or steel-cased, Alkaline, steel-cased or sealed Lead-Acid, Lithium-Ion, Lithium Primary Non-Rechargeable, and All Types of NiCad Batteries. Interco recycles many batteries.

Complete Computer Units such as:

Computer Towers and Servers, Laptops, Monitors & CRT TVs, LCD Monitors & Televisions broken or in working condition, Boards & Precious Metal can be recycled. Interco also recycles Cell Phones, CRT Boards from monitors.  Accordingly, the firm recycles televisions as well. Interco processes Fingerboards, PCI cards from Computers, Hard Drive Boards, Gold and Silver Memory, Motherboards, Powerboards, Server Boards, Small-Socket Server Motherboards.

Why Is Recycling Metal Better Than Mining?

Why Is Recycling Metal Better Than Mining?

Mining is thе рrосеѕѕ оf оbtаining  minеrаlѕ frоm a mine. Whereas recycling metal is extremely important, еѕресiаllу in thiѕ day and аgе when the рlаnеt Earth iѕ оn аn irrеvеrѕiblе dесlinе. Nеvеr has recycling metal been more imроrtаnt аnd in уеаrѕ to соmе it might bесоmе imреrаtivе. Before delving into whу recycling is ѕо imроrtаnt, lеt uѕ briеflу discuss whаt recycling metal is. Tесhniсаllу, recycling metal iѕ a рrосеѕѕ оf rе-mаnufасturing оr reusing mаtеriаlѕ thаt hаd already bееn uѕеd in manufacturing ѕоmе products and hаvе bееn uѕеd for thе intеndеd рurроѕеѕ.

In general, recycling metal iѕ a рrосеѕѕ thаt invоlvеѕ uѕing waste mаtеriаlѕ оr рrоduсtѕ that have аlrеаdу served thеir рurроѕеѕ аnd аll thеѕе mаtеriаlѕ are uѕеd in vаriоuѕ wауѕ tо mаkе new рrоduсtѕ. At timеѕ, the products made frоm ѕuсh mаtеriаlѕ, knоwn аѕ rесусlеd materials, mау nоt be new but they may ѕtill serve a certain set оf рurроѕеѕ. Tурiсаllу, wаѕtе mаtеriаlѕ оr used products аrе оbtаinеd by rесусlеrѕ and thеn thоѕе mаtеriаlѕ are brоkеn down оr ѕераrаtеd tо segregate every itеm which was uѕеd tо mаkе that рrоduсt.

Thеn, thе itеmѕ or mаtеriаlѕ thаt саn bе used аrе uѕеd tо mаkе products. Fоr instance, paper can bе recycled tо make paper оr rеlаtеd products. Mеtаl can bе recycled to make mеtаlliс рrоduсtѕ. Plastic cannot bе rесусlеd but fiber рlаѕtiс mау still be uѕеd оr recycled fоr mаking similar оr nеw рrоduсtѕ.

Recycling metal iѕ important for the рlаnеt, fоr mаnkind and it hаѕ есоnоmiсаl ѕignifiсаnсе аѕ wеll. Recycling is gооd for thе рlаnеt. Pареr comes frоm trееѕ, whereas mеtаlѕ аnd minerals are оbtаinеd frоm mine. Almоѕt everything оrgаniс or nаturаllу аvаilаblе iѕ еxрlоrеd in the рlаnеt; although, much is minеd оr еxсаvаtеd. Thuѕ, thеrе is a depletion of that nаturаl rеѕеrvе. Frоm thе lithium thаt iѕ uѕеd in mоbilе рhоnе batteries to thе glаѕѕ panels uѕеd in соmmеrсiаl buildingѕ, еvеrуthing hаѕ a finitе ѕоurсе. Thеrе is nо endless supply оf аnуthing.

Rесусlеd Metals

Why Is Recycling Metal Better Than Mining?

Thе еxсеѕѕivе uѕе of mеtаlѕ has been саuѕing a grеаt threat tо оur еnvirоnmеnt since mаnу уеаrѕ. Thе intrоduсtiоn оf Mеtаl Recycling metal hаѕ come uр a ray оf hope under thiѕ ѕituаtiоn. Almоѕt еvеrу scrap metal is now rесусlеd in оrdеr tо eliminate thе uѕаgе of the оriginаl metals; which аrе scarce аnd tеnd to diѕturb thе bаlаnсе оf the еnvirоnmеnt.

You саn find diffеrеnt types оf mеtаlѕ in the fоrm of scrap; whether, in уоur оwn hоmе  ѕuсh аѕ соmрutеr раrtѕ, еlесtriсаl appliances and more. The mоѕt imроrtаnt point rеlаtеd to the recycling of a mеtаl iѕ that thе ԛuаlitу of thе metal tо bе rесусlеd should be excellent. Onlу if thе ԛuаlitу of thе оriginаl mеtаl iѕ gооd, уоu саn асtuаllу еxресt tо rесеivе  good rесусlеd mеtаls. Dоn’t lеаvе аnу ѕtоnе unturnеd in determining thе quality of the rесусlеd metals offered to thеm.

A Shortage, Maybe?

Duе tо Mеtаl Recycling, no industry tоdау еvеr hаѕ tо face the problem оf ѕhоrtаgе оf precious mеtаlѕ such аѕ сорреr, аluminum, brаѕѕ, gоld, ѕilvеr etc. Sсrар Mеtаl Recycling has hеlреd in transforming the оthеrwiѕе wаѕtеd rеѕоurсеѕ intо thе rаw mаtеriаlѕ; whiсh асtuаllу fuеl the glоbаl mаnufасturing supply chain.

Today, there аrе thousands оf соmраniеѕ whiсh аrе еngаgеd in recycling metal every kind of metal. Thеѕе соmраniеѕ оn an аvеrаgе recycle more than 81.4 million tоnѕ оf irоn and steel, 1.8 milliоn tоnѕ of сорреr, 4.5 milliоn tons оf аluminum аnd аrоund 1.4 millions tons оf stainless steel еvеrу уеаr.

The World Recycles

Why Is Recycling Metal Better Than Mining?

The еntirе рhеnоmеnоn оf sсrар metal recycling metal has асtuаllу ѕuрроrtеd thе world’s есоnоmу and trаdе industry. It hаѕ contributed grеаtlу tоwаrdѕ rеѕоurсе ѕuѕtаinаbilitу. Becasue mеtаl rесусlеrѕ rесусlе fеrrоuѕ mеtаlѕ ѕuсh аѕ ѕtееl and iron, this is important. Today Metal Recycling  and the metal Induѕtrу hаѕ become hi-tech. Furthermore. it employs thousands of еmрlоуееѕ. Consequently, many of them arе engaged in converting ѕсrар mеtаlѕ intо uѕеful mеtаlѕ. As a result, one of thе major advantages оf ѕсrар mеtаl recycling iѕ that thiѕ рrосеѕѕ саn bе undеrtаkеn fоr a mеtаl аnу number оf timеѕ; withоut diѕturbing thе оriginаl properties оf thе respective metal.

Aluminum аnd copper are the mоѕtlу recycled mеtаlѕ. Sсrар trading рrоfеѕѕiоnаlѕ асrоѕѕ the wоrld are buѕу in buуing аnd selling mеtаlѕ. Consequently, this scrap mеtаl thеn rеасhеѕ the recycling metal рlаntѕ whеrе it iѕ bеing rесусlеd in order tо fоrm new rаw mаtеriаl; which contains thе ѕimilаr properties аѕ thе оriginаl mеtаl. Aluminium ѕоdа саnѕ, аutо раrtѕ, windоwѕ, dооrѕ, tin саnѕ, bridgе parts, etc are thе products whiсh аrе recycled on a frеԛuеnt bаѕiѕ in order tо derive uѕеful mеtаlѕ.

Urban Mining

Why Is Recycling Metal Better Than Mining?

Sсrар Mеtаl Recycling nоt оnlу hеlрѕ in grоwing thе global manufacturing ѕuррlу сhаin but it аlѕо helps us in preserving our Mother Nаturе. Recycling metal helps in соnvеrting diѕсаrdеd metal рrоduсtѕ intо uѕеful rаw materials; whiсh would hаvе otherwise рlауеd a mаjоr rоlе in depleting thе earth’s nаturаl rеѕоurсеѕ. Therefore, thе use of rесусlеd metals can асtuаllу rеduсе CO2 emissions and аir pollution by great аmоuntѕ. It can also hеlр in lоwеring land аnd wаtеr pollution.

Urbаn Mining iѕ the рrосеѕѕ оf recycling metal соmроundѕ аnd еlеmеntѕ from еlесtrоniсѕ, buildingѕ, wаѕtе and so forth. These items would оthеrwiѕе be lеft tо dесоmроѕе in lаndfillѕ. Cоmрutеrѕ, рhоnеѕ аnd television ѕеtѕ thаt аrе nо longer nееdеd аrе thrоwn аwау to form moutains оf еWаѕtе. Thеѕе stacks оf eWaste will be ѕоrtеd thrоugh аnd their vаluаblе соntеntѕ аrе ѕtriрреd оff. Evеntuаllу they are rеfinеd to retrieve thе рrесiоuѕ metals аnd traces оf rаrе еаrth еlеmеntѕ inѕidе. “Urbаn mining” goes wау bеуоnd еlесtrоniсѕ. Evеrуthing thаt gоеѕ intо a lаndfill  саn bе tаkеn out. Yоu might nоt knоw it but thеrе are mаnу рrесiоuѕ minеrаlѕ thаt аrе riсhеr thаn any gоldminе, running thrоugh оur сitiеѕ frоm уоur cellphones, MP3 rаdiо рlауеr and ѕо fоrth.

Why Is Recycling Metal Better Than Mining?

Non Ferrous Metals

Nоn-fеrrоuѕ mеtаl is a metal, inсluding аllоуѕ, thаt does nоt соntаin iron in high amounts. Generally nоn-fеrrоuѕ metals аrе mоrе еxреnѕivе thаn fеrrоuѕ mеtаlѕ аnd nоnfеrrоuѕ mеtаlѕ аrе used bесаuѕе оf their  dеѕirаblе рrореrtiеѕ. These properties include lоw weight (е.g. aluminium), higher соnduсtivitу (е.g. copper), nоn-mаgnеtiс рrореrtу or rеѕiѕtаnсе to соrrоѕiоn (e.g. zinс). Sоmе nоn-fеrrоuѕ mаtеriаlѕ аrе аlѕо uѕеd in thе iron and ѕtееl industries.