Scrap Brass shells are a very common type of recycled ammunition. People use brass shells because of the shell’s durability, corrosion resistance, and ease of reloading. Since a lot of people use them, it is important to collect and recycle them. So, someone who has a lot of brass shells may need to research where to sell scrap brass shells.
Manufacturers can sell scrap brass shells to Interco for recycling. The parts of the ammo include:
- Black Powder
Why You Should Recycle Scrap Brass Shells
Recycling scrap brass shells help keep valuable materials out of landfills. Brass shells have low degrees of aluminum and manganese bronze. This means that 90 percent of the metal can be reused. Since manufacturers produce large amounts of scrap, recycling these shells is important.
Companies should sell scrap brass shells to a recycling center. Recycling centers, like Interco, buy used ammo to recycle. Companies that recycle these shells are doing their part in making sure these materials do not end up in landfills. These companies are doing their part to reduce waste, landfills, and overall pollution.
The Recycling Process
Ammunition cannot enter the recycling process as a live round. They may explode, which causes safety concerns. For this reason, the lead in live ammo contaminates the shell’s brass. So, recyclers find it difficult to separate lead from brass.
The process of recycling brass shells is easy with Interco. These are the steps to recycling brass shells:
- Shells must be sorted by material. Shell alloys are usually made from brass, aluminum, or steel. Occasionally they are plated with chrome, nickel, silver or even gold.
- After being sorted, the shell must be removed.
- Shells “pop” in a high-temperature kiln after being sorted. This forces any live rounds to explode.
- A quality control supervisor verifies the shells after they are placed in a special bin to cool.
- Next, the shells enter a cleaning cycle. Cleaners rinse the shells to remove as much lead and dirt as possible.
- Inspectors run clean-and-popped shells through a shaker table. They verify that live rounds and other unwanted materials are removed.
- Next, a hammer mill or shredder takes the shells and deforms them into smaller pieces. Then an aggregator machine takes these pieces and loads them for transportation.
- Finally, the shells are taken to a brass mill. Here they are melted and combined. Mixed with metallic elements to achieve a specific blend. Then, shells are formed into rod or ingot.
Interco buys scrap brass shells across the United States. Due to transportation costs, recycling brass shells that are far away can be difficult. Regardless, Interco will work with you to overcome any travel issues.
What Not To Do With Ammo
You should not bury ammo. The gunpowder can be used for fertilizer, but the rest of the cartridge is not good for the environment. Burying ammo could cause the lead to leak into the water supply.
You should not throw ammo away in the trash. This is not safe. The ammo could fire when the compactor in trucks run. Also, do not soak the bullet in water or oil. There is no guarantee that this will ruin the gunpowder. It could still ignite.
The safest thing to do is to sell scrap brass shells to a recycling center.
Interco is a global recycling company providing metals, computers, and electronics recycling services to the industrial, dealer, and government organizations throughout the western hemisphere. The facility has a 145,000 sqft. processing plant committed to the processing of computers, electronics, and batteries with the remainder of the indoor facility used for the processing of nonferrous industrial metals.
The facility is comprised of five buildings — approximately 400,000 square feet total — on more than 35 acres. The company facility has more than 20 inbound and outbound docks for receiving and shipping nonferrous scrap material as well as a railroad rail spur to load rail cars.
The company is within proximity to four major interstates (I-44, I-55, I-64, and I-70) while centrally located just across the Mississippi River from St. Louis, Missouri in Madison, Illinois. The company offers a convenient delivery location as the facility is near four major interstates (I-44, I-55, I-64, and I-70) that intersect all of the Midwest and Central USA.
Overall, brass shells are piling up for companies and they need to be recycled. Companies that sell scrap brass shells to recycling centers are doing their part to decrease waste, landfills, and overall pollution. Recycling centers, like Interco, buy scrap brass shells for recycling. In fact, Interco continues to lead the way in innovative industrial recycling solutions. To learn more about where to sell scrap brass shells, click here.